Loading...
Product Details
| Item | LX－6EL | |
| Main machine | Maximum Bottle capacity | 2000ml |
| Maximum bottle diameter | Φ106mm | |
| Neck diameter | Φ18~38mm | |
| Maximum bottle height under neck | <330mm | |
| Maximum preform height under neck | <155mm | |
| Clamping stroke | 120mm | |
| Bottom die stroke | 60mm | |
| Bottle pitch | 114.3mm | |
| Maximum output rate (bph) | 7,200(1500ml round bottle) | |
| Number of molds | 6 | |
| Heating part | Number of heating modules | 5 |
| Number of heating lamps | 10 | |
| Number of preform bases | 100 | |
| Electric part | Voltage | 380V |
| Frequency | 50Hz | |
| Service power | 30~40kw/h | |
| Installation power | 110kw | |
| Air source
(High pressure air consumption depends on PET bottle volume, altitude) |
Low pressure | 1Mpa |
| Low pressure air consumption | 2m³/min | |
| High pressure | 3.5Mpa | |
| High pressure air consumption | 8m³/min | |
| Cooling water | Pressure | 2~4bar |
| Cooling water (≤18℃) | Flux | 6m³/h |
| Weight | G.W. | Around 10 ton |
| Dimension | Main machine (L×W×H) | 5800×2600×2600mm |
| Preform unscrambler(L×W×H) | 4500×3500×3500mm |
